Your Urethane Spray Foam Experts

Classic PH Series Proportioner

 

 

Classic PH Series Hydraulic Proportioner

  • Hydraulically Operated Proportioner
  • Passive Hydraulic System
  • Opposed Piston Metering Pumps
  • New Pump Base Design
  • Digital Automatic Temperature control for superior control of material processing
  • Open Frame Design
  • Relay Logic Control
  • Heater Options, Pressure Ranges and Ratio options to process most Foam and Coatings
  • Automatic ISO Lube System
  • Hose Heat Tap Setting 

 




  

 

 
MODEL PH-25 2000 PH-25 3000 PH-40 2000 PH-40 3500
Output

25lbs/min

1.3 gallons/min  40lbs/min 2.5 gallons/min
 Max. Working Pressure 2000PSI 3000PSI 2000PSI 3500PSI
 Max. Hose Length 310 ft 310 ft 410 ft 410 ft
 Heater Wattage

8,000 watts

10,000 watts

12,000 watts

8,000 watts

10,000 watts

12,000 watts

15,000 watts

18,000 watts

21,000 watts

15,000 watts

18,000 watts

21,000 watts

 Hose Heating Power 90 volts 90 volts 120 volts 120 volts
 Max. Fluid Temperature 190 Degrees F 190 Degrees F 190 Degrees F 190 Degrees F
Weight (w/o Hydraulic Fluid) 520 lbs 520 lbs 520 lbs 520 lbs
Electrical @ 8KW Heaters

27 amps @ 3x230V

60 amps @ 1x230V

27 amps @ 3x230V

60 amps @ 1x230V

          n/a         n/a
Electrical @ 10KW Heaters

35 amps @ 3 x 230V

70 amps @ 1 x 230V

35 amps @ 3 x 230V

70 amps @ 1 x 230V

          n/a         n/a
Electrical @ 12KW Heaters

43 amps @ 3 x 230V

80 amps @ 1 x 230V

43 amps @ 3 x 230V

80 amps @ 1 x 230V

        n/a         n/a
Electrical @ 15KW Heaters              n/a             n/a

80 amps @ 3 x 230V

130 amps @ 1 x 230V

80 amps @ 3 x 230V

130 amps @ 1 x 230V

Electrical @ 18KW Heaters              n/a             n/a

93 amps @ 3 x 230V

93 amps @ 3 x 230V

Electrical @ 21KW Heaters              n/a             n/a

106 amps @ 3x230V

106 amps @ 3x230V

 

 

Standard Features:

 

The PMC “Classic” Series PH was “Designed with the Customer in Mind” to provide applicator friendly and serviceability to meet today’s market place demands.

Hydraulically Operated Proportioner: Passive Hydraulic system provides a rugged, consistent and long lasting power train as the drive mechanism for this plural component proportioning system.

Opposed Piston Metering Pumps: The horizontal configuration of these in-line metering pumps helps to eliminate uneven loading during the pumping cycle. Provides minimal fluctuations in spray pressures.

New Pump Base: The Newly Designed Pump Bases ensure pressure stability throughout the cycle and provide user friendly access for preventive maintenance.

Digital Automatic Temperature Control: Digital controllers allow the operator to precisely program the set temperature to suit the chemical system being used. Used in concert with the Newly Designed PMC Temperature Sensing Unit (TSU), the Classic Series will provide accurate and consistent Hose Heat to insure the most effective yield for your product under varying conditions.

Open Frame Design: Allows the operator full view and easy access to all the critical components of the proportioner.

Relay Logic Control: Point to point wiring in series with relays and circuit breakers minimize the use of printed circuit boards in all control functions.

Heaters: The PH Series is available with two mass aluminum heaters per unit; configurations ranging from 8,000 total watts (4,000 per side) up to 21,000 total watts (10,500 per side).

Ratio: Standard Classic units are sold with a 1:1 Ratio. Various size pumps are available to switch volume ratio range from 1:1 to 3:1.

ISO Lube System: Standard on all GH series units to help flush the ISO pump shaft resulting in longer seal life.

Heater Tap Settings: Standard terminal block tap settings for your particular hose length.

 

Optional Features:

  • PMC Spray and Pour Guns
  • Material Transfer Pumps for 55 and 30 Gallon Drums
  • Heater Hoses
  • Recirculation Blocks
  • Ratio Testing Tool
  • Replaceable TSU Probe 
  •  

manuals and brochuresDownload Brochures, Manuals and more here